Laser Tag Equipment - a primer

It is important to be aware of the many different styles of equipment offered by various laser tag manufacturers, and to understand the differences, both functionally and visually.
Laser tag equipment has two basic purposes: Transmit Information ~ Receive Information.
Transmitting and Receiving Information is accomplished electronically by Radio Frequency (RF), Infrared (IR), Laser, Fiber Optics or a combination of two or three of these methods. LAZER RUNNER uses a combination of Radio Frequency, Laser and Fiber Optic Technology in their transmission and receiving of information.

Radio Frequency (RF)
LAZER RUNNER has developed a RADIO FREQUENCY system that is like no other. Most RF systems are susceptible to interference causing game delays and poor communication. LAZER RUNNER is the only RF system that allows the operator to change channels automatically if interference is detected, allowing smooth trouble free laser tag play with no interruptions.
With the latest in micro technology, LAZER RUNNER uses a surface mount RF circuit board and internal antennae for transmission of critical data. This compact design is lightweight and eliminates the bulky circuitry and external antennas other RF laser tag manufacturers use.
Our engineers have studied past RF systems and their faults to develop a state-of-the-art RF laser tag system that is reliable, easily programmable, and provides players with necessary key statistics and Real Time Scoring. You can even place TV monitors in the lobby or playing arena showing players scores and rankings in Real Time! The hassle of using a keyboard for all day to day operations has been eliminated and replaced with an easy to use Touch Screen Monitor with simple step-by-step instructions. The hardwiring of the arena peripherals has also been eliminated, reducing the time for set-up. The LAZER RUNNER RF system is ready to go right out of the box. All software is loaded right at the factory. EASY TO USE – EASY TO MAINTAIN!

Infrared (IR)
Infrared systems make up approximately 80 percent of all laser tag equipment, and can range from extremely poor to good quality. The potential problems with IR technology are numerous.
With infrared systems there is in essence two beams that are utilized ~ a laser beam and an ‘invisible’ infrared beam. The laser beam in infrared systems does not transmit data and is used for visual purposes only! The infrared beam (similar to what is used on your TV remote), that does transmit data, is collimated to try to travel alongside the laser beam. Unfortunately this design has several flaws: (a) Infrared cannot be focussed to pinpoint accuracy thereby creating beams that vary from a few inches to several feet in diameter. What you aim at with your laser is not always what you hit with your IR beam and (b) these beams can become unaligned causing even greater error in targeting accuracy and operation of the system. These beams need to be regularly maintained and realigned. (c) targeting range is limited; (d) the possibility of stray signals is very high (players deactivated by IR that has bounced off walls or ceilings) and (e) game turnaround time is slow due to the time consuming downloading process required at the end of each game.

Laser Transmission
LAZER RUNNER is the only laser tag system in the world that uses the actual laser beam for transmission of data. This is achieved through a low power (less than one milliwatt) laser diode. The benefit of this system is pinpoint accuracy. What you aim at is what you hit!
Best of all, the range of targeting is fantastic - with well over 500 foot capabilities! Serious laser tag players, of all ages, demand this range and accuracy. The proof is in the repeat customers and in the profits. This technology makes LAZER RUNNER the most challenging of all the laser tag systems. There are no false hits or misaligned beams often experienced with other laser tag systems. LAZER RUNNER keeps the players coming back for more!

LAZER RUNNER is a true laser tag system.

Targets (Receivers)
Targets on laser tag equipment can be found mounted on vests, waist belts and phasers. The targets are usually lit by flashing or glowing LED’s. Once targeted and deactivated, some equipment must be re-energized at a pod or a reactivation system.
Following months of research and data manipulation, we developed advanced fiber optic sensors to harness laser light. These optics were the first of their kind ever to be offered to the public through laser tag technology. By incorporating fiber optics, LAZER RUNNER has eliminated the need for extra circuitry. As a result we have reduced the weight and increased the ergonomic appeal of our vests.
Other laser systems require bulky receiver circuitry for each and every target area ~ front, back, shoulders, belts and phasers. These target areas are usually raised and covered by clear plastic for protection. Unfortunately these ‘raised’ areas are highly prone to wear and scratching resulting in poor reception of signals and inaccurate scoring.
LAZER RUNNER has just one receiver that does it all. LAZER RUNNER fiber optic targets are mounted flush with the vest. This greatly eliminates costly maintenance. Our vests are noticeably clean and streamlined, allow pinpoint targeting accuracy, and are visually stunning.
The LAZER RUNNER fiber optic sensors can be programmed to be one of six colors. This means every single LAZER RUNNER vest is exactly the same. You choose the colors, you choose the teams. You are no longer limited to the number of red vests and green vests, but can program blue, red, green, purple, orange and yellow teams in any number of players you desire.
Above all, the fiber optic vests take punishment. High tech, lightweight and crucially durable. Malfunctioning vests translate to down time and lost revenue. Our equipment takes a beating and keeps on going!
Why settle for second best? LAZER RUNNER fiber optic technology will give you a system that delivers endurance and profit.

Phaser (Laser Housing)
These hand-held units vary from two-handed machine gun styles, to hand-held phasers. Phasers are usually attached by a cord to their vest or waist pack. These units can provide the player with sound effects, time remaining, player’s score and other statistics.
LAZER RUNNER Phasers provide the players with all these features and more.
LAZER RUNNER uses hand held phasers. Hand held phasers are lighter in weight and more user friendly to customers of all ages than two handed units. Phasers also allow the customer to have one hand free to keep their balance when moving throughout the arena.
All LAZER RUNNER components were designed to incorporate the best features available in the industry.
EVERY PIECE OF LAZER RUNNER EQUIPMENT WAS BUILT TO BE THE BEST IN THE BUSINESS . . . AT A REASONABLE PRICE!
The LAZER RUNNER System does it all.

Breakthrough in Technology
LAZER RUNNER is state-of-the-art equipment. Breakthroughs in technology have allowed us to offer everything that you would expect to find in the most sophisticated laser games, but at a fraction of the price. From individual and team scoring to sentry pods and home bases that fire back. From tamperproof accounting, to our patented “quick-charge” system. From auto-select modules that run the game, to durable solid state lasers. We provide it all from our factory direct to you! And at a price you won’t believe!

Lazer Runner Laser Tag Systems
7927A Coronet Road, Edmonton, Alberta, Canada, T6E 4N7

PH: 780-496-9058 FAX: 780-496-9059